Cold Pressed Rapeseed Oil.

Latest Articles

Cold Pressed Rapeseed Oil.
Page Previous 1, 2, 3

Downsizer Forum Index -> Small Business Questions, Ideas and Advice

Author

Message

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Mon Nov 11, 13 9:00 pm Post subject:

Rob R wrote:

You could always tweet them, although they do seem more bothered about Downton Abbey at the moment.

No, I do believe they are working on it...

I suspect it is just marketing drivel which they never expected to get asked about, so now they have to think up something convincing...

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Thu Nov 14, 13 10:15 am Post subject:
I've got an answer. Apparently they have a taste test to choose the suppliers, and a quality test at the seed store before pressing.

DorsetScott

Joined: 23 Oct 2011
Posts: 500
Location: Bournemouth

Posted: Thu Nov 14, 13 11:04 am Post subject:

Hairyloon wrote:

I've got an answer.
Apparently they have a taste test to choose the suppliers, and a quality test at the seed store before pressing.

I wonder how many phrases we could come up with for your product HL. Yours could be "specially selected" too, but sure we could get something even catchier

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Thu Nov 14, 13 11:15 am Post subject:

DorsetScott wrote:

Hairyloon wrote:

I've got an answer.
Apparently they have a taste test to choose the suppliers, and a quality test at the seed store before pressing.

I wonder how many phrases we could come up with for your product HL. Yours could be "specially selected" too, but sure we could get something even catchier

Do you think it would still count as "selected by hand" if I used a shovel?

DorsetScott

Joined: 23 Oct 2011
Posts: 500
Location: Bournemouth

Posted: Thu Nov 14, 13 11:45 am Post subject:

Hairyloon wrote:

DorsetScott wrote:

Hairyloon wrote:

I've got an answer.
Apparently they have a taste test to choose the suppliers, and a quality test at the seed store before pressing.

I wonder how many phrases we could come up with for your product HL. Yours could be "specially selected" too, but sure we could get something even catchier

Do you think it would still count as "selected by hand" if I used a shovel?

Even better, "carefully selected by hand"

Point and speak to them before you shovel....

"Those ones" *point* "Careful now" *shovel*
"Those ones" *point* "Careful now" *shovel*

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Tue Jan 28, 14 12:02 pm Post subject:

Well I reckon the press I bought was a lemon: I could not get the yield up over about 15% no matter what I did.

So I tried modifying the press: that sort of worked: I got a much improved yield, but the modifications could not take the strain. The press is at the engineer's now...

But that still leaves me a problem: the improved yield has also given me much finer particulates in the oil: it comes out a mucky grey colour rather than a nice golden yellow.

I've left it to settle for a few weeks with minimal effect, and I've put it through a 1 micron filter and it still looks mucky.

I've not (yet) found a sensible supplier of filters less than 1 micron...

Any ideas?

RichardW

Joined: 24 Aug 2006
Posts: 8443
Location: Llyn Peninsular North Wales

Posted: Tue Jan 28, 14 2:50 pm Post subject:
Could it be the metal wearing itself making the greyish gunk?

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Tue Jan 28, 14 3:01 pm Post subject:

RichardW wrote:

Could it be the metal wearing itself making the greyish gunk?

That had not occurred to me... I'll go get a magnet in a moment.

But I don't think so. I am fairly sure that it is just ground up seed...

Lloyd

Joined: 24 Jan 2005
Posts: 2699

Posted: Tue Jan 28, 14 6:41 pm Post subject:
I'd be very interested to see some pictures of the process.

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Tue Jan 28, 14 6:49 pm Post subject:

Lloyd wrote:

I'd be very interested to see some pictures of the process.

I'd probably best take some... When I start processing again.

I have a couple: I'll dig them out later.

Last edited by Hairyloon on Wed Jan 29, 14 12:14 am; edited 1 time in total

Nick

Joined: 02 Nov 2004
Posts: 34535
Location: Hereford

Posted: Tue Jan 28, 14 7:05 pm Post subject:

Hairyloon wrote:

https://forum.downsizer.net/viewtopic.php?p=1364691#1364691

One micron is huge in some places.

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Tue Jan 28, 14 7:20 pm Post subject:

Nick wrote:

Hairyloon wrote:

Any ideas?

https://forum.downsizer.net/viewtopic.php?p=1364691#1364691

One micron is huge in some places.

Thanks. I did look for that thread earlier... Ok, not very hard.

Can't actually open that site on this phone though. I'll look at it later.

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Wed Jan 29, 14 12:14 am Post subject:

Lloyd wrote:

I'd be very interested to see some pictures of the process.

Ok, this is the business end of the press, just after a session of pressing:

And this is it without the barrel:

Lloyd

Joined: 24 Jan 2005
Posts: 2699

Posted: Wed Jan 29, 14 6:24 pm Post subject:
looks a serious bit of hardware.

Hairyloon

Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.

Posted: Wed Jan 29, 14 6:58 pm Post subject:

Lloyd wrote:

looks a serious bit of hardware.

Fairly serious... be nice if it worked.

I suppose that's the problem with buying off some dodgy bloke you found on eBay.

	Downsizer Forum Index -> Small Business Questions, Ideas and Advice	All times are GMT Page Previous 1, 2, 3
Page 3 of 3

View Latest Posts