Home Page
   Articles
       links
About Us    
Traders        
Recipes            
Latest Articles
Twin wheel wheelbarrows
Page Previous  1, 2
 
Post new topic   Reply to topic    Downsizer Forum Index -> Make Your Own/DIY
Author 
 Message
Ty Gwyn



Joined: 22 Sep 2010
Posts: 4562
Location: Lampeter
PostPosted: Tue Feb 09, 16 9:56 pm    Post subject: Reply with quote
    

Not used a twin wheel barrow myself,seen them used around stables and piggeries on flat concrete surfaces,
My though was ,how the hell do you push that through muck or over rough ground,
My latest barrow is an all galv Scandinavian job,good solid ,balanced barrow £70.

yummersetter



Joined: 26 Jan 2008
Posts: 3241
Location: Somerset
PostPosted: Tue Feb 09, 16 10:01 pm    Post subject: Reply with quote
    

One of our four barrows is a two-wheeler, probably the same one you've linked. Its our least favourite (for garden and orchard purposes); cumbersome as it only travels in straight lines, tends to be loaded more so it heavier and it's a nuisance to tip as it has to be lifted a long way. Going rusty, too.
I'd sooner do two trips in a nippier barrow to one with this, my first choice is quite small and narrow but manoeuvres well up overgrown paths and between bulging trees and bushes.

Treacodactyl
Downsizer Moderator


Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism
PostPosted: Wed Feb 10, 16 7:59 am    Post subject: Reply with quote
    

I've deliberately avoided going for a bigger barrow to prevent the temptation of overloading. With the same load as a single wheeled barrow the wheels will dig in less as they will have less weight on them and I will also need to lift less.

I also currently have problems with the singled wheeled barrow tipping over when loading if it's parked sideways on a slope, even with just loading grass cuttings. A twin will be more stable.

The maneuverability is a concern, I'd like to try one before buying but nowhere local seems to stock them. Most of the planned work will not require weaving in and out of places though.

Nick



Joined: 02 Nov 2004
Posts: 34535
Location: Hereford
PostPosted: Wed Feb 10, 16 8:12 am    Post subject: Reply with quote
    

Surely, with the same load you'll have to lift the same, regardless of the number of wheels.

Treacodactyl
Downsizer Moderator


Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism
PostPosted: Wed Feb 10, 16 8:14 am    Post subject: Reply with quote
    

Depends on the axle. Single wheeled barrows have it at the front, so 2/3 of the load goes down the front and 1/3 on your arms. The twin I linked to has the axle under the load so I would expect less weight on your arms.

chez



Joined: 13 Aug 2006
Posts: 35934
Location: The Hive of the Uberbee, Quantock Hills, Somerset
PostPosted: Wed Feb 10, 16 9:46 am    Post subject: Reply with quote
    

My Pa invested in one as he got more unsteady on his feet (in to his eighties when his knees went). It's good on even ground in straightish lines, not so nippy, as other people have said. I like it, but I think it entirely depends on the user and the job.

wellington womble



Joined: 08 Nov 2004
Posts: 15051
Location: East Midlands
PostPosted: Wed Feb 10, 16 4:47 pm    Post subject: Reply with quote
    

And easier to heft, I expect.

I am pondering the practicality of wheelbarrows at all (not necessarily for any one else, but I'm not finding them great). I'm thinking of a four wheeler pull/push truck. I find all the lifting up and down a bit tedious, and they run away with me and then give me a jolt where they get stuck in uneven ground. Worst of all, you can only manoeuvre the thing from behind it. So having driven up to, say, shed door with a bale of straw, I have to squeeze past the thing and can't pull it in tight after me very easily. Then it is almost impossible to push the thing out of the doorway from the the front, so I'm stuck in the shed. I find this happens between my veg beds as well.

I can see the advantages of a barrow where you need to tip, but I mostly don't. I also suspect they are more manoeuvrable around tight corners, but for 95 percent of what I do the advantages of being able to shove it from both directions, and not having to support any weight on my arms in transit would massively outweigh being able to tip and corner on one wheel. Everything has be shovelled in either way and my beds are all raised and my compost is in bins, so I can't tip out anyway.

Sorry, TD, I'm not suggesting they are remotely suitable for your job!

sean
Downsizer Moderator


Joined: 28 Oct 2004
Posts: 42207
Location: North Devon
PostPosted: Wed Feb 10, 16 5:23 pm    Post subject: Reply with quote
    

I'm thinking a sack barrow with a smallish bin and some bungy cords. Multiple bins would enable a three person fill/transport/empty relay too.

dpack



Joined: 02 Jul 2005
Posts: 45377
Location: yes
PostPosted: Wed Feb 10, 16 6:18 pm    Post subject: Reply with quote
    

a good sack barrow with pneumatic tyres is useful on flat things .ideal for lifts ,pavements etc.

rubbish at lumpy or soft stuff as they have little ground clearance and they are too wide for a scaff plank

the triple wheels each side are good for curbs and steps

one can overload them and bend the axle which makes them very wonky (oops three times)

re too much to lift in a standard barrow if you dont fill fully at the rear of the barrow (or add extra at the front) they are almost balanced on the axle ,in mixed loads put the heavy stuff at the front , with long stuff let it poke out at the front .

properly filled a good barrow should have only a few kilos of lift on the handles and the wheel takes nearly all the load.a badly filled one feels heavy or falls over sideways

NorthernMonkeyGirl



Joined: 10 Apr 2011
Posts: 4584
Location: Peeping over your shoulder
PostPosted: Wed Feb 10, 16 8:00 pm    Post subject: Reply with quote
    

I've seen a barrow for sale that has twin wheels in the normal place (at the front) - worth a consideration?

Mistress Rose



Joined: 21 Jul 2011
Posts: 15539

PostPosted: Thu Feb 11, 16 8:04 am    Post subject: Reply with quote
    

WW, I sometimes pull a builders wheelbarrow when I am shifting logs around the yard and it is muddy. Find it much easier.

Treacodactyl
Downsizer Moderator


Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism
PostPosted: Thu Feb 11, 16 10:44 am    Post subject: Reply with quote
    

dpack wrote:
properly filled a good barrow should have only a few kilos of lift on the handles and the wheel takes nearly all the load.a badly filled one feels heavy or falls over sideways


That doesn't work when you're lifting soil, sand, wet concrete etc. Even you cannot override the laws of physics, you'll still have to life a load of 20-30kg if the barrow is moving 90kg of cement.

I've also used barrows for years and do put heavy items in mixed loads at the front if possible but that does make the nose more unbalanced which can't be done on a slope.

NMK, I have also found a twin wheel barrow with the axle at the front, but I'm not sure if that would be better, hence the question.

As Chez says, I think they will be better for some people in some situations so I'll get one and have a play.

WW, I've also looked at the 4 wheel carts, for different reasons. I couldn't really find a robust one that would be suitable for me. I kept thinking for £400 or so for a decent one I could make something. Then there's something like a logging arch for moving long logs...

I've now come to the conclusion it's a shame you can't but some form of adult Meccano, so you could buy a kit to make various barrows or carts to see which one is best.

dpack



Joined: 02 Jul 2005
Posts: 45377
Location: yes
PostPosted: Thu Feb 11, 16 1:25 pm    Post subject: Reply with quote
    

if you have a huge amount to move up or down a slope it is possible to hire conveyor belt kit

another option is to hire a labourer for the mass transport jobs which is easy on the back and probably cheaper than a selection of experimental barrows.

i try to load a barrow so there is very little to lift and do not find that unstable ,

decent barrows are designed with a nose deep container so when in use a level load has more weight at the front and the centre of gravity is only just behind the wheel . they also have long handles so leverage is on your side.

anything over about 30 degrees either needs approaching at an angle across the slope or a ramp to extend the distance and reduce the angle.

as a slight aside i have considered experimenting with a lithium battery/motor and control gear /auto retardation for slope work. i suspect owt robust enough would be a daft price.

tim_and_nicky



Joined: 28 Nov 2008
Posts: 261
Location: Beautiful Galicia, NW Spain
PostPosted: Thu Feb 11, 16 2:50 pm    Post subject: Reply with quote
    

I've always liked the idea of these things: https://www.lowtechmagazine.com/2011/12/the-chinese-wheelbarrow.html

They seem to combine the steerability of the traditional wheelbarrow with a more sensibly placed axle. Never seen one for sale on this side of the world, though.

RichardW



Joined: 24 Aug 2006
Posts: 8443
Location: Llyn Peninsular North Wales
PostPosted: Sun Feb 14, 16 9:22 am    Post subject: Reply with quote
    

We had a twin wheel one once.

Never again.

I dont like filling the things once never mind refilling it when it self empties as its wheel are so close to the balance point that one spade full to much to the front has it tipping forward.

Post new topic   Reply to topic    Downsizer Forum Index -> Make Your Own/DIY All times are GMT
Page Previous  1, 2
Page 2 of 2
View Latest Posts View Latest Posts

 

Archive
Powered by php-BB © 2001, 2005 php-BB Group
Style by marsjupiter.com, released under GNU (GNU/GPL) license.
Copyright © 2004 marsjupiter.com