Home Page
   Articles
       links
About Us    
Traders        
Recipes            
Latest Articles
plaster

 
Post new topic   Reply to topic    Downsizer Forum Index -> Energy Efficiency and Construction/Major Projects
Author 
 Message
Cathryn



Joined: 16 Jul 2005
Posts: 19856
Location: Ceredigion
PostPosted: Mon Jun 29, 15 3:44 pm    Post subject: plaster Reply with quote
    

I was wondering about where to put this - but major projects unfortunately fits. I think a lot of the plaster in the house has had it. Bits and pieces of cornices are falling off as the walls dry out and where we have had radiators taken off the walls there are little trails of plaster, some of which looks a bit like it's lime and hair. There's nothing much we can do is there, apart from either board it over or totally remove it and re-plaster?

It's late 1700 and Victorian. The interior is being dragged into the 21st century and the exterior for that matter.

dpack



Joined: 02 Jul 2005
Posts: 45372
Location: yes
PostPosted: Mon Jun 29, 15 3:54 pm    Post subject: Reply with quote
    

big subject

a mix of mend and replace will probably be best

mouldings are a specialist sub category but quite a lot of old plaster can be saved and mended or easily replaced

vegplot



Joined: 19 Apr 2007
Posts: 21301
Location: Bethesda, Gwynedd
PostPosted: Mon Jun 29, 15 3:59 pm    Post subject: Reply with quote
    

Open your house as a host for restoration apprenticeships specialising in lime renders. One room at a time.

Cathryn



Joined: 16 Jul 2005
Posts: 19856
Location: Ceredigion
PostPosted: Mon Jun 29, 15 4:23 pm    Post subject: Reply with quote
    

Currently every room apart from the sitting room has floors up, carpets peeled back, bit's of copper piping and stuff everywhere. We cannot get into our bedroom because of the scaffolding in it. What it doesn't have and should have is the sound of hammering and drilling.

What I want to do is lock the door against everyone. I can't though because the frame had to be removed to let some large bits of boiler in.

I do not like your suggestion Vegplot! (But I'll give you the secret password if you want to come and visit with or without bags of lime.)

Hairyloon



Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.
PostPosted: Mon Jun 29, 15 5:28 pm    Post subject: Reply with quote
    

You could take a mould off the mouldings with... erm... silicone? latex?
Shouldn't be too difficult... (he says confidently).

dpack



Joined: 02 Jul 2005
Posts: 45372
Location: yes
PostPosted: Mon Jun 29, 15 5:36 pm    Post subject: Reply with quote
    

Hairyloon wrote:
You could take a mould off the mouldings with... erm... silicone? latex?
Shouldn't be too difficult... (he says confidently).


yep sort of
a few hundred quid for the first metre and a fifth of that price per metre once the mould is made is a good estimate

Behemoth



Joined: 01 Dec 2004
Posts: 19023
Location: Leeds
PostPosted: Mon Jun 29, 15 5:39 pm    Post subject: Reply with quote
    

I've always been surprised how relatively cheap plaster moulding is for the impact it has on the finish of a room.

dpack



Joined: 02 Jul 2005
Posts: 45372
Location: yes
PostPosted: Mon Jun 29, 15 5:56 pm    Post subject: Reply with quote
    

from existing moulds that are similar to what you need to replace is at per metre length price

long term it seems a bargain .

Behemoth



Joined: 01 Dec 2004
Posts: 19023
Location: Leeds
PostPosted: Mon Jun 29, 15 6:17 pm    Post subject: Reply with quote
    

And many suppliers hold the typical patterns of different periods. already.

Cathryn



Joined: 16 Jul 2005
Posts: 19856
Location: Ceredigion
PostPosted: Mon Jun 29, 15 7:23 pm    Post subject: Reply with quote
    

I've noticed that. The mouldings in the house are all different, deep but uncomplicated. We might be able to replace missing bits.

dpack



Joined: 02 Jul 2005
Posts: 45372
Location: yes
PostPosted: Tue Jun 30, 15 4:09 pm    Post subject: Reply with quote
    

Behemoth wrote:
And many suppliers hold the typical patterns of different periods. already.


the chaps i used in london had original moulds going back to queen anne's time as well as being able to make new from old.a making shed and lots and lots of box moulds .

a slight aside is wood mouldings can be matched as well if needs be.

Colin & Jan



Joined: 03 Mar 2006
Posts: 203
Location: Dover, Kent
PostPosted: Wed Jul 01, 15 11:27 am    Post subject: Reply with quote
    

Many years ago in the long and distance past I helped a carpenter who must have been 75+ years of age. We repaired some very ornate ceiling to wall cornice. He had made the template out of wood, which was used to slide along the wet plaster-of-Paris to make the cornice. Long and tortuous but a lovely job when finished. One of the 'old-style' craftsmen.

dpack



Joined: 02 Jul 2005
Posts: 45372
Location: yes
PostPosted: Wed Jul 01, 15 11:42 am    Post subject: Reply with quote
    

that is the way to make em

tis far above diy or most trades skills.

in a long term /major restoration it could be considered a reasonable expense to repair or replace good mouldings

Post new topic   Reply to topic    Downsizer Forum Index -> Energy Efficiency and Construction/Major Projects All times are GMT
Page 1 of 1
View Latest Posts View Latest Posts

 

Archive
Powered by php-BB © 2001, 2005 php-BB Group
Style by marsjupiter.com, released under GNU (GNU/GPL) license.
Copyright © 2004 marsjupiter.com