Home Page
   Articles
       links
About Us    
Traders        
Recipes            
Latest Articles
Cutting a lot of rough grass
Page Previous  1, 2, 3, 4
 
Post new topic   Reply to topic    Downsizer Forum Index -> Land Management
Author 
 Message
Ty Gwyn



Joined: 22 Sep 2010
Posts: 3977
Location: Lampeter
PostPosted: Mon Apr 18, 16 8:34 pm    Post subject:  Reply with quote    

Do yourself a favour,get a contractor in with a proper tractor and flail/bushwacker,get the bulk done and you can play with the rest yourself,
It`ll be a lot cheaper in the long run,and you`ll have a base to work from.

wellington womble



Joined: 08 Nov 2004
Posts: 14810
Location: East Midlands
PostPosted: Tue Apr 19, 16 8:46 am    Post subject: Reply with quote    

Well, yes. Even if I could get someone in who's happy to do a proper job round all the fiddly bits, that still leaves me with nothing to keep on top of it with. I'd still need a mower that will cope the rough grass and the terrain, or it will just revert back and I'll be in the same position again in a month.

Nick wrote:
Our ride on was awful on anything that wasn't already a bowling green. Mid deck, grounded on everything. Suggest the kind of thing councils use for verges would be best.


That's what I figure. I just need to know what they're called so I can stop men in machine shops pointing out ladylike mid deck mowers that do stripes!!

NorthernMonkeyGirl



Joined: 10 Apr 2011
Posts: 4278
Location: Peeping over your shoulder
PostPosted: Tue Apr 19, 16 9:26 am    Post subject: Reply with quote    

Take pics in to show them if they get patronising?

Ty Gwyn



Joined: 22 Sep 2010
Posts: 3977
Location: Lampeter
PostPosted: Tue Apr 19, 16 11:19 am    Post subject: Reply with quote    

[quote="wellington womble:1460963"]Well, yes. Even if I could get someone in who's happy to do a proper job round all the fiddly bits, that still leaves me with nothing to keep on top of it with. I'd still need a mower that will cope the rough grass and the terrain, or it will just revert back and I'll be in the same position again in a month.

[quote]

Well you won`t know till you phone around a few contractors,after cutting the brambles and scrub,gather it up and burn it,then get the whole area spike harrowed and rolled,then you won`t have rough grass and terrain that a toy mower will struggle with.

Pilsbury



Joined: 13 Dec 2004
Posts: 5645
Location: East london/Essex
PostPosted: Tue Apr 19, 16 6:30 pm    Post subject: Reply with quote    

DS scyth party?
You provide the chickpeas...

wellington womble



Joined: 08 Nov 2004
Posts: 14810
Location: East Midlands
PostPosted: Wed Apr 20, 16 8:46 am    Post subject: Reply with quote    

I loathe chickpeas. I do have a spit roaster though....

I'm most concerned about being able to cut the grass there is at the moment. There is a good acre that is grass(ish) that needs cutting last week.

NorthernMonkeyGirl



Joined: 10 Apr 2011
Posts: 4278
Location: Peeping over your shoulder
PostPosted: Wed Apr 20, 16 9:54 am    Post subject: Reply with quote    

Hire someone to get in and get it done ASAP, then you can see what you're working with in terms of terrain and pick a suitable vehicle for yourself?

Slim



Joined: 05 Mar 2006
Posts: 4691
Location: New England (In the US of A)
PostPosted: Wed Apr 20, 16 11:03 am    Post subject: Reply with quote    

Yes, with all due respect this thread is verging into piss or get off the pot territory.

Lots of options have been brought up, and those that won't work have been discussed. It doesn't seem like that leaves too many that will work, so the decision should be a bit easier now, yeah? Time to purchase or rent and get it done, or time to hire someone to get it done for now and go from there.

Hairyloon



Joined: 20 Nov 2008
Posts: 14816
Location: Today I are mostly being in Yorkshire.
PostPosted: Thu Apr 21, 16 8:47 pm    Post subject: Reply with quote    

I don't reckon it's a one size fits all job: you want a strimmer/brushcutter to deal with the fiddlier bits and some kind of mower for the bulk of it. You can picjk up a fairly decent strimmer for not a lot of money though.
I have been wondering if I should offer to come visit with my brushcutter, but it sounds like it is more urgent than I can find you a window for...

wellington womble



Joined: 08 Nov 2004
Posts: 14810
Location: East Midlands
PostPosted: Thu Apr 21, 16 9:54 pm    Post subject: Reply with quote    

That's very kind of you. I've got a stihl brush cutter, and using it is working out ok for me. The issue is the mower, specifically what kind of mower do I need?

I think I'm going to take a risk and buy this, with a topper.

http://m.ebay.co.uk/itm/EXCELLENT-4WD-YANMAR-COMPACT-TRACTOR-WITH-592-HOURS-NO-EXTRA-VAT-/231891290046?nav=WATCHING_ACTIVE

I'm sure a topper will handle the grass, which is something. And if gradually brush cutting back and following on with the topper doesn't work I can get a flail mower for it. I can also get a roller, harrow, trailer and mole relatively cheaply. I should be able to get the whole package for around 5k, which is about what I have budgeted. The rotavator is a bonus, because I want to extend the vegetable beds which it should make quick work of. I can sell on the flail, mole, roller and rotavator when I've got it under control.

I've just got my fingers crossed its not a heap of scrap and I can figure out how to drive it!

I have spent the last two days hauling stuff into a big pile to assess what size skip I will need. I'll get on the phone when the weather breaks tomorrow. I'm also taking the oldest of the caravans to a breakers tomorrow. That should improve the view a bit!

How on earth does one get rid of tyres and gas canisters? Does anyone want a lot of roofing slates and a gazillion scattered bricks? And old swing? About twenty metres of armoured cable that's been outside for three years? 50 or so empty wine bottles that have also been living al fresco? And I haven't even looked in the garages yet or the dumpy bags....

Last edited by wellington womble on Fri Apr 22, 16 9:31 am; edited 1 time in total

Hairyloon



Joined: 20 Nov 2008
Posts: 14816
Location: Today I are mostly being in Yorkshire.
PostPosted: Thu Apr 21, 16 10:40 pm    Post subject: Reply with quote    

wellington womble wrote:
The issue is the mower, specifically what kind of mower do I need?

That is something I cannot help you with, sorry.

Quote:
I think I'm going to take a risk and buy this, with a topper.

http://m.ebay.co.uk/itm/EXCELLENT-4WD-YANMAR-COMPACT-TRACTOR-WITH-592-HOURS-NO-EXTRA-VAT-/231891290046?nav=WATCHING_ACTIVE

I've just got my fingers crossed its not a heap of scrap and I can figure out how to drive it!


I would be wondering why the seller only has a rating of 6... But he appears to be some kind of dealer so that should give you some statutory rights.

Quote:
How on earth does one get rid of tyres and gas canisters?


Gas canisters should go back to the gas depot. Tyres are a bit of a problem... stack 'em up and grow spuds in them?
Quote:
Does anyone want a lot of roofing slates and a gazillion scattered bricks?

Yes, but not enough to come down and get them: my car isn't big enough.
Quote:
About twenty metres of armoured cable that's been outside for three years?

It's armoured, so it shouldn't much matter that it's been outside. The ends may have got corroded, but the bulk of it should be fine.
Quote:
And I haven't even looked in the garages yet or the dumpy bags....

Sounds like you've been having loads of fun.

Pilsbury



Joined: 13 Dec 2004
Posts: 5645
Location: East london/Essex
PostPosted: Fri Apr 22, 16 5:42 am    Post subject: Reply with quote    

For the bricks ans slates try a local reclamation hard, they might be interested enough to come and collect them

Mistress Rose



Joined: 21 Jul 2011
Posts: 8823

PostPosted: Fri Apr 22, 16 6:24 am    Post subject: Reply with quote    

The armoured cable might be saleable for the copper. Ask the local scrap merchant if they are interested.

The little tractor looks good if in good condition. We have a little one, but a different make and it does mowing, forwarding, log splitting, and fence post ramming. They can be very useful, but you do tend to suffer from Black and Decker syndrome with all the attachments.

wellington womble



Joined: 08 Nov 2004
Posts: 14810
Location: East Midlands
PostPosted: Fri Apr 22, 16 8:29 am    Post subject: Reply with quote    

I am Immune to Black and Decker syndrome following long exposure to someone else's. I will not forget the irritation of having to move endless crap off my chopping boards and falling over it in the hall (it wasn't like we didn't have a four car garage with no cars in) Anyway, the garages here are still full of someone else's bits.

It's bad enough with a five year old who's doing 'going green' at school. This largely consists of taking recycling out of the box and painting it. Thus preventing it from being recycled and leaving it cluttering up the house!

Last edited by wellington womble on Fri Apr 22, 16 10:02 pm; edited 1 time in total

NorthernMonkeyGirl



Joined: 10 Apr 2011
Posts: 4278
Location: Peeping over your shoulder
PostPosted: Fri Apr 22, 16 3:35 pm    Post subject: Reply with quote    

You could advertise tiles, bricks, tyres on freegle for someone to collect? They do have uses. Someone might be bilding an earthship. Or retaining wall.

Post new topic   Reply to topic    Downsizer Forum Index -> Land Management All times are GMT
Page Previous  1, 2, 3, 4
Page 4 of 4
View Latest Posts View Latest Posts

 

Archive
Powered by php-BB © 2001, 2005 php-BB Group
Style by marsjupiter.com, released under GNU (GNU/GPL) license.
Copyright 2004 marsjupiter.com

<-- -->