Home Page
   Articles
       links
About Us    
Traders        
Recipes            
Latest Articles
Does anyone use a woodburning Rayburn ?
Page Previous  1, 2, 3, 4
 
Post new topic   Reply to topic    Downsizer Forum Index -> Energy Efficiency and Construction/Major Projects
Author 
 Message
RichardW



Joined: 24 Aug 2006
Posts: 8433
Location: Llyn Peninsular North Wales
PostPosted: Sat Jan 26, 13 9:12 am    Post subject:  Reply with quote    

If it is a wood only Rayburn & not a SFW then no.

Will also depend on which grate it has fitted, some are for wood only.

Tavascarow



Joined: 06 Aug 2006
Posts: 8407
Location: South Cornwall
PostPosted: Sat Jan 26, 13 3:36 pm    Post subject: Reply with quote    

RichardW wrote:
If it is a wood only Rayburn & not a SFW then no.

Will also depend on which grate it has fitted, some are for wood only.

Didn't know they made wood specific models now.
Although from their website the 300w appears to have
Quote:
additional flat grate baffle plates that increase the area of the grate suited specifically for burning wood.

Which to me infers they are removable.
My experiences are only with the older models which IMHO will burn virtually anything combustible.

RichardW



Joined: 24 Aug 2006
Posts: 8433
Location: Llyn Peninsular North Wales
PostPosted: Sat Jan 26, 13 6:57 pm    Post subject: Reply with quote    

The grate is not the only difference. The air still goes in via the wheel but there are internal plates that channel it to above the grate to give the wood its top air that it burns better with.

smudgesmumzie



Joined: 25 Jan 2013
Posts: 5
Location: north wales
PostPosted: Sat Jan 26, 13 6:59 pm    Post subject: Reply with quote    

thank you for the warm welcome and answers
does anyone know the visible difference between the Heatranger 345
and the 355 I bought mine second hand some time ago as I have been renovating a house and only just got round to plumbing the Rayburn in,now ive actually looked at the users guide I have got 2! one for the 345 and 1 for the 355 I know ones for solid fuel and wood and the others for wood only.Im so confuzzled

RichardW



Joined: 24 Aug 2006
Posts: 8433
Location: Llyn Peninsular North Wales
PostPosted: Sat Jan 26, 13 9:09 pm    Post subject: Reply with quote    

What does the grate look like?

Riddle bars or a wheel & its an SFW

Flat plate with holes in & its a W, will also have Stainless Steel air guides in the lower ash box area directing the air to above the plate.

Drumist



Joined: 27 Jan 2013
Posts: 1

PostPosted: Sun Jan 27, 13 12:35 am    Post subject: Reply with quote    

Hi All

This has been a really useful thread for me as we are just considering the possibility of a wood burning Rayburn in the kitchen.

I understand there are some issues with UK building regs, in that you are not allowed to install a wood burning stove in a room with an extractor, and kitchens have to have an extractor!

Do any of you know how to get around this, or are Rayburns classed differently to normal stoves?

smudgesmumzie



Joined: 25 Jan 2013
Posts: 5
Location: north wales
PostPosted: Sun Jan 27, 13 5:34 pm    Post subject: Reply with quote    

Thank you so much Richard. I have riddle bars so i must have a sfw.
thats great news as I can now burn wood and coke etc.

nickofthewoods



Joined: 25 Sep 2012
Posts: 59
Location: South West Wales
PostPosted: Sun Jan 27, 13 6:35 pm    Post subject: Reply with quote    

Have my back to the side of a rayburn royale as I write..heats our home,our water and baking our bread soon.All fired on well seasoned birch and hazel.Loved it for the 20 years we have had it.

A word of warning to anyone re converting back from oil to wood..because of the dramatic price in oil a lot of people are doing this....in the first case one neighbour had a chimney fire immediately from the build up of deposits in the chimney...in the second and worse case..due to unknown reasons..possibly some leaked oil in the stove's rockwool insulation..friends lost their home to a fire on the first burn of a re converted rayburn.

RichardW



Joined: 24 Aug 2006
Posts: 8433
Location: Llyn Peninsular North Wales
PostPosted: Sun Jan 27, 13 8:18 pm    Post subject: Reply with quote    

Also worth checking is the flue pipe. The type used for oil burners is often Ali or at best a low grade stainless steel. Burning wood requires a high grade stainless steel.

smudgesmumzie



Joined: 25 Jan 2013
Posts: 5
Location: north wales
PostPosted: Mon Jan 28, 13 7:48 am    Post subject: Reply with quote    

nickofthewoods wrote:
Have my back to the side of a rayburn royale as I write..heats our home,our water and baking our bread soon.All fired on well seasoned birch and hazel.Loved it for the 20 years we have had it.

A word of warning to anyone re converting back from oil to wood..because of the dramatic price in oil a lot of people are doing this....in the first case one neighbour had a chimney fire immediately from the build up of deposits in the chimney...in the second and worse case..due to unknown reasons..possibly some leaked oil in the stove's rockwool insulation..friends lost their home to a fire on the first burn of a re converted rayburn.

when we first tested our Rayburn we noticed some smoke coming out of the side we undid the side panel and noticed the rockwool was on fire!!!there was some kind of oil filled thermostat? leaking oil and this had caught fire! thank goodness we were both there

lornfile



Joined: 13 Feb 2018
Posts: 1

PostPosted: Tue Feb 13, 18 3:21 pm    Post subject: Reply with quote    

Almost all closed ovens are designed to be run with the fire-door closed. You should not attempt to run them with the door open, due to emission of fumes. (Even re-fuelling emits some fumes.) So please don't!

Pirellithecat



Joined: 05 Aug 2019
Posts: 3

PostPosted: Mon Aug 05, 19 7:20 am    Post subject: Reply with quote    

Hi,
New here so be gentle with me .......

Probably a daft response as it is a very expensive option, but we have a woodburning Esse range (looks and behaves like an Aga).

We light it in October and it then stays lit until the end of April. We use it for all our cooking and it heats the a significant part of the house (no rads - just leave the kitchen door open. Only other heat source is a Wood Burner in the lounge which is used in the winter evening and one in the "snug" which is used very infrequently.

We use around half a wheel barrow of wood a day on the Esse, it has three ovens and 2 hot plates and you can open the outer door to reveal a glazed internal door should you want to see the fire.

It's great!

In these days of global warming, I'm rather anti coal burning and with the Esse you just don't need to.

Pirellithecat



Joined: 05 Aug 2019
Posts: 3

PostPosted: Mon Aug 05, 19 7:25 am    Post subject: Reply with quote    

PS - it's in our newly built extension and has been seen/approved in the kitchen by the Building Inspector. We have an extractor fan (well it's a MHRV unit so a fan of sorts) and there are some regs to accommodate, but it's all signed off. So it's definitely "do-able".

Hope that helps

gz



Joined: 23 Jan 2009
Posts: 6603
Location: Ayrshire, Scotland
PostPosted: Mon Aug 05, 19 7:30 am    Post subject: Reply with quote    

Welcome! You might like to introduce yourself on the....Introduce Yourself thread

I had a Bosky doing the same job as yours when I lived in North Wales, and a Morso Squirrel doing the backup from the living room.

Mistress Rose



Joined: 21 Jul 2011
Posts: 10901

PostPosted: Tue Aug 06, 19 7:20 am    Post subject: Reply with quote    

Sounds lovely, and what I have wanted for years, but don't think I will ever have it now. We have a multifuel stove in our lounge and leave the door open, so it part heats the rest of the house. I use the top for cooking sometimes as it is ideal when I want something that is a long cook, like bolognaise, or cassoulet. We do keep it in over night with a bit of coal, but mostly we burn wood on it.

Post new topic   Reply to topic    Downsizer Forum Index -> Energy Efficiency and Construction/Major Projects All times are GMT
Page Previous  1, 2, 3, 4
Page 4 of 4
View Latest Posts View Latest Posts

 

Archive
Powered by php-BB © 2001, 2005 php-BB Group
Style by marsjupiter.com, released under GNU (GNU/GPL) license.
Copyright 2004 marsjupiter.com