Home Page
   Articles
       links
About Us    
Traders        
Recipes            
Latest Articles
Name of hinge?

 
Post new topic   Reply to topic    Downsizer Forum Index -> Make Your Own/DIY
Author 
 Message
Nick



Joined: 02 Nov 2004
Posts: 34535
Location: Hereford
PostPosted: Sat Sep 17, 16 2:47 pm    Post subject: Name of hinge? Reply with quote
    

See this picture? It's a hinge. The strappy bit has a pin, top and bottom, and they sit in the metal 'cup' that screws to the frame.

I've lost some 'cups'. Do they have a proper name, and can anyone suggest a seller, please? I cannot find them, but I suspect that's because I don't know what I'm searching for.

Ta.


dpack



Joined: 02 Jul 2005
Posts: 45321
Location: yes
PostPosted: Sat Sep 17, 16 3:01 pm    Post subject: Reply with quote
    

no idea what they are called ( sockets seems a fair bet for a name) but i would expect they come as part of a whole hinge set with the strap part .

the whole thing is called a strap hinge

a decent blacksmith could probably make something suitable but it would probably cost more than a whole mass produced hinge

Treacodactyl
Downsizer Moderator


Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism
PostPosted: Sat Sep 17, 16 3:14 pm    Post subject: Reply with quote
    

I would call the gate hinge sockets, gate hinge sockets. Cast socket while looking at shed/gate hinges also throws up results.

It's the sort of thing that comes up in job losts of ironmongery for pennies but new ones cost a fair bit. If you have the time they might be picket up in shops that sell old stuff but are not as grand as antique shops.

https://www.ironmongerydirect.co.uk/products/gate_fence_and_shed_hardware/gate_hinges/4084/heavy_cast_socket_galvanised_/472737

dpack



Joined: 02 Jul 2005
Posts: 45321
Location: yes
PostPosted: Sat Sep 17, 16 3:34 pm    Post subject: Reply with quote
    

wow ,im surprised ( and pleased for nick ) they can be bought without the strap part.

i spose the next issue is size of hole and will the bolt bit fit or wobble . i spose wobble could be sorted with a liner made out of a bit of suitable pipe and within reason they could be bored out a bit to accommodate the fatter bolt.

Treacodactyl
Downsizer Moderator


Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism
PostPosted: Sat Sep 17, 16 3:45 pm    Post subject: Reply with quote
    

The do three different sizes and there may be other people selling various size and shapes out there.

https://www.ironmongerydirect.co.uk/search?SearchText=Cast+socket+

Nick



Joined: 02 Nov 2004
Posts: 34535
Location: Hereford
PostPosted: Sat Sep 17, 16 3:54 pm    Post subject: Reply with quote
    

Treacodactyl wrote:
The do three different sizes and there may be other people selling various size and shapes out there.

https://www.ironmongerydirect.co.uk/search?SearchText=Cast+socket+



Thank you both.

And I found the missing ones in the garage. They were in a safe place. Obviously.

Treacodactyl
Downsizer Moderator


Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism
PostPosted: Sat Sep 17, 16 4:00 pm    Post subject: Reply with quote
    

I shall look forward to tomorrows "name that mystery item" post, or perhaps we should have a "name that mystery item and does anyone know where I've stashed it" thread?

Hairyloon



Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.
PostPosted: Sat Sep 17, 16 4:31 pm    Post subject: Reply with quote
    

If in doubt, call it Kevin... Or maybe Eric.

Nick



Joined: 02 Nov 2004
Posts: 34535
Location: Hereford
PostPosted: Sat Sep 17, 16 5:27 pm    Post subject: Reply with quote
    

Treacodactyl wrote:
I shall look forward to tomorrows "name that mystery item" post, or perhaps we should have a "name that mystery item and does anyone know where I've stashed it" thread?


I think we need the latter. If I've got it, I don't need to know what it's called quite as often.

dpack



Joined: 02 Jul 2005
Posts: 45321
Location: yes
PostPosted: Sat Sep 17, 16 8:43 pm    Post subject: Reply with quote
    


Treacodactyl
Downsizer Moderator


Joined: 28 Oct 2004
Posts: 25795
Location: Jumping on the bandwagon of opportunism
PostPosted: Sun Sep 18, 16 7:46 am    Post subject: Reply with quote
    

Hairyloon wrote:
If in doubt, call it Kevin... Or maybe Eric.


Surely Evadne or Hilda?

dpack



Joined: 02 Jul 2005
Posts: 45321
Location: yes
PostPosted: Sun Sep 18, 16 3:01 pm    Post subject: Reply with quote
    


Behemoth



Joined: 01 Dec 2004
Posts: 19023
Location: Leeds
PostPosted: Sun Sep 18, 16 5:20 pm    Post subject: Reply with quote
    

All hinges are called Mary.

Hairyloon



Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.
PostPosted: Sun Sep 18, 16 8:22 pm    Post subject: Reply with quote
    

Behemoth wrote:
All hinges are called Mary.

Spoken with clear authority. I shall not argue.

love154



Joined: 20 Sep 2016
Posts: 12
Location: Dartford
PostPosted: Wed Oct 13, 21 2:12 pm    Post subject: Reply with quote
    

These are the ones you want https://www.fencingandlandscapesupplies.co.uk/ironmongery/exterior-gate-door-hinges/heavy-reversible-hinges

Post new topic   Reply to topic    Downsizer Forum Index -> Make Your Own/DIY All times are GMT
Page 1 of 1
View Latest Posts View Latest Posts

 

Archive
Powered by php-BB © 2001, 2005 php-BB Group
Style by marsjupiter.com, released under GNU (GNU/GPL) license.
Copyright © 2004 marsjupiter.com